All best sellers

There are 429 products.

Showing 397-408 of 429 item(s)

Reference: GX270RHG4

Honda GX270 UT2 RHG4

Type RHG4: - shaft 25.0 mm (S type), shaft coupling 22mm- 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- throttle and choke lever (operation on the engine) + connection for external wire pull- with oil bath coupling, shaft 22mm, wedge 7 x 7 x 33mm- CDI ignition with adjustment curve and without...

Reference: GX270RHQ5

Honda GX270 UT2 RHQ5

Equipment GX270: - Oil bath coupling with 1: 2 reduction, shaft Ø 22 mm- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- Fuel tank 5.3 liters, white- Exhaust standard- CDI ignition with variable ignition timing - WITHOUT shutdown- throttle and choke lever (engine operation)- Connection for...

Reference: GX270RHE5

Honda GX270 UT2 RHE5

Equipment type RHE5: - Oil bath coupling with 1: 2 reduction, shaft Ø 22 mm- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- E-start and reversing starter- Control box with ignition lock- Air filter dual- Fuel tank- Exhaust standard- CDI ignition with variable ignition timing - WITHOUT shutdown- throttle and choke lever (engine operation)-...

Reference: GX270SHQ5

Honda GX270 UT2 SHQ5

Equipment type SHQ5: - shaft Ø 25 mm (S type)- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- CDI ignition with adjustment curve (WITHOUT switch-off)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- throttle and choke lever (engine operation)- Connection for external...

Reference: GX200RHQ4

Honda GX200 UT2 RHQ4

Equipment type RHQ4 - shaft 20.0 mm (S type), shaft coupling 22mm- 7 X 7 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- Fuel tank- Exhaust standard- Gas and choke lever (operation on the engine) + connection for external throttle cable- with oil bath coupling, shaft 22mm, wedge 7 X 7 X 33mm

Reference: GX390SHQ5

Honda GX390 UT2 SHQ5

Equipment type SHQ5: - shaft Ø 25,0 mm (S-type)- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- CDI ignition with variable ignition timing and WITHOUT shutdown- Fuel tank 6.10 liters, white- Exhaust standard- throttle and choke lever (engine operation)- Connection for external wire pull-...

Follow us on Facebook