Reference: 1872007
Bodywork pinch seal including accessories
Accessories 1 piece each:- 1831047 Washer for M8 8.4x25x1.5 galvanized- 1831020 Washer for M8 8.4x16x1.6 galvanized- 1822046 Hexagon nut UNF 5/16 galvanized, self-locking
Reference: 1872007
Accessories 1 piece each:- 1831047 Washer for M8 8.4x25x1.5 galvanized- 1831020 Washer for M8 8.4x16x1.6 galvanized- 1822046 Hexagon nut UNF 5/16 galvanized, self-locking
Reference: classic
Balaclava for maximum hygienic conditionsOne size fits allMost affordable model availableThe color black160gr with very good finish100% cottonPrice for 100 piecesMost efficient shipping is 10 units per box (= 1000 balaclavas)
There are 4 products.
Reference: GX200RHG4
Equipment type RHG4 - shaft 20.0 mm (S type), shaft coupling 22mm- 7 X 7 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Exhaust standard- throttle and choke lever (engine operation)+ Connection for external throttle cable - with oil bath coupling, shaft 22mm,...
Reference: GX200SHQ4
Equipment type SHQ4 - shaft 20 mm (S type)- wedge 5 X 5 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- throttle and choke lever (engine operation)+ Connection for external throttle cable- without clutch
Reference: GX200QHQ4
Type QHQ4 - shaft 19.05 mm (Q type)- wedge 4.8 X 4.8 X 38mm (wedge is NOT included)- female thread 5 / 16-24 UNF- recoil starter (pull starter)- Air filter dual- Fuel tank- Exhaust standard- throttle and choke lever (operation on engine) + connection for external throttle linkage
Reference: GX200RHQ4
Equipment type RHQ4 - shaft 20.0 mm (S type), shaft coupling 22mm- 7 X 7 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- Fuel tank- Exhaust standard- Gas and choke lever (operation on the engine) + connection for external throttle cable- with oil bath coupling, shaft 22mm, wedge 7 X 7 X 33mm