Reference: 25651-883-621

Gauge, oil level GX160/200

White plastic dipstick for the oil bath clutch Honda GX160 / 200

Reference: 90403-883-620

Trust Washer GX160/200

Reference: 90741-883-621

Wedge GX160/200

Crankshaft wedge for oil bath clutch GX160 / 200

Reference: 91301-805-000

O-Ring Dipstick GX160/200/270

Reference: 92800-12000

Sump Plug GX160/200/270

for oil bath clutch GX160 to 270.

Reference: RHG4

Honda GX160 RHG4

Equipment type RHG4 - oil bath coupling, shaft Ø 22mm (shaft motor Ø 20 mm)- 7 x 7 x 33 mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Exhaust standard- throttle and choke lever (operation on the engine) + connection for external wire pull - WITHOUT fuel tank

Reference: GX160SHQ4

Honda GX160 UT2 SHQ4

Equipment type SHQ4 - shaft Ø 20 mm (S type)- wedge 5 x 5 x 33 mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- Gas and choke lever (operation on the engine) + connection for external throttle cable- without clutch

Reference: 94301-08100

Pin Dowel 8x10 GX160-270

For coupling housing GX160 / 200

Reference: 95701-06055-00

Screw 6x55 GX160/200

For coupling housing GX160 / 200

Reference: 95701-08022-00

Screw 8x22 GX160/200

For fixing the oil bath coupling to the engine cover.

Reference: GX160RHQ4

Honda GX160 UT2 RHQ4

Equipment type RHQ4 - oil bath coupling, shaft Ø 22mm (shaft motor Ø 20 mm)- 7 x 7 x 33 mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- throttle and choke lever (operation on the engine) + connection for external wire pull

Reference: 92101-080-350H

Screw 8x35 GX160/200/270

Screw for fixing the coupling on the crankshaft.